• Department of Electronics & Telecommunication Engineering,
• Don Bosco College Of Engineering,
• Fatorda, Margao,Goa- 403 602.
• Tel No : (0832) 2741045/2743944
• Fax : (0832)2742648
• E-mail: flavia.leitao@dbcegoa.ac.in

She has been working as an Assistant Professor in the Electronics and Telecommunication Department of Don Bosco College of Engineering since July 2015. She has previously worked as an Assistant Professor in the Electronics and Telecommunication Department of Goa College of Engineering for 1 yr. She has also worked as an Assistant System Engineer at Tata consultancy Services (TCS) for 5.5 yrs in the Embedded domain, during which she had the opportunity to work in the Silicon Valley in California for Cisco

• VLSI Design
• Embedded systems
• PCB Design

• Attended a Faculty development programme on “ANDROID APP DEVELOPMENT”, conducted by the Computer department of DBCE on the 29th and 30th of June 2016.
• Attended a one week TEQIP II ISTE STTP on “Industrial Automation & Virtual Instrumentation”, organized by the ETC Dept. of DBCE  from November 7th to 11th 2016.
• Attended a webinar on “Cloud Computing” organized by Department of Computer Engineering, Don Bosco College of Engineering on 1st March 2017.
• Attended a two day Workshop on “SPACE – Security Privacy and Applied Cryptographic Engineering” organized by department of Science and Humanities and Computer Engineering, Don Bosco College of Engineering from 13th to 14th Dec 2017.
• Attended a three day Faculty Development Programme (FDP) on 8051, PIC and ARM controllers, where resource people from Microchip conducted hands-on training on these embedded boards, on the 11th, 12th and 13th of June 2018.
• Attended a one week ISTE Workshop on “Cadence –Design, Analysis and Simulation of circuits” organized by Department of Electronics and Telecommunication Engineering, PCCE, Verna from 1stto 5thJanuary 2018.
• Attended a one week AICTE-ISTE Workshop on “Research Tools  and Techniques” organized by Department of Computer Engineering, DBCE from 7th to11thMay 2018.
• Attended a one week AICTE ISTE TEQIP III STTP on “Artificial Intelligence and Machine Learning” organized by Department of Electronics and Telecommunication Engineering, DBCE, Fatorda from 2nd to 6th July 2018.
• Attended a one week TEQIP III AICTE ISTE STTP on  “Artificial Intelligence and Machine Learning”organized by Department of Electronics and Telecommunication Engineering in association with Shivaji University,Kolhapur, from 2nd July 2018 to 6th July 2018.
• Attended a one week ISTE Workshop on “Virtual Reality, Augmented Reality & 3D Modeling”, from 4th to 8th of November 2019, at DBCE fatorda.
• Attended a one week FDP on “Evolution from offline to online Teaching”, from 30th May- 3rd June 2020.
• Attended a four week workshop on “Introduction to the Internet of Things and Embedded Systems”, from University of California, Irvine and offered through Coursera, from 5th June 2020 onwards.
• Attended a one week ISTE approved online/SF-STTP/FDP Programme on “Design Development of Drone and its Applications”, from 21st  June 2021 to 25th June 2021, organized by Sanjay Ghodawat University, Atigre, Kolhapur, Maharashtra 
• Attended a 6 days AICTE- ISTE sponsored Online Induction/Refresher Programme on “ELECTRONIC CIRCUITS SIMULATION AND PCB DESIGN” held from 14th January to 20th January 2022

• Conducted a one day workshop on “Analytical Reasoning” for the students of TE-ETC on the 11th of July 2016.
• Conducted two day workshop on “Schematic & Layout using OSCAD” for the students of BE-ETC on 9th &10th of Jan 2017.
• Conducted one day workshop on “PCB Design” for the students of SE-ETC on 14th of Jan 2017.
• Conducted one day workshop on “LabVIEW” for the students of TE-ETC on 3rd April, 2017.
• Organized a Two Day Faculty Development Programme (FDP) on “Raspberry Pi” on 23rd and 24th of June 2017, for the faculty members of Engineering colleges and Polytechnics.
• Conducted one day workshop on “LabVIEW” for the students of TE-ETC on 23rd Sept 2017.
• Conducted one and a half day workshop on “Schematic and Layout using OSCAD” for the students of BE-ETC on the 8th and 9thof January 2018.
• Conducted one day workshop on “PCB Design” for the students of SE-ETC on the 27th of January, 2018.
• Organized a one Day Faculty Development Programme (FDP) on “ARM Cortex” on 29th Sept. 2018, as a part of the MoU signed between Eduvance and DBCE
• Organized a 2 weeks certified course on “Embedded Systems & IoT”, for the T.E and B.E students of ETC from the 2nd to 12th of Jan 2019 in collaboration with Eduvance
• Conducted a Three-Day Workshop on Firebird Robot for the students of TE and BE ETC, on the 25th, 26th& 28th of June 2019.
• Organized a 6 day certified course on “Arduino & IoT”, for the T.E students of ETC from the 8th to the 13th of July 2019, in collaboration with Eduvance
• Conducted a workshop on “PCB Design and Fabrication” on the 17th Oct, 2019, as a part of the tech feast “Technova 2019”.
• Organized a 3 day hands on workshop on “Drone Design and Aviation, from 7th February to 9th February 2020, in collaboration with Eduvance and Drona Aviation
• Conducted a one day workshop on “PCB Design” on the 8th of February, 2020 for the third year students of ETC.
• Organized a number of Knowledge Sharing sessions under R & D for the ETC Faculty members
• Conducted a one day Faculty Development Program (FDP) on “PCB Design and Fabrication” on the 19th August, 2020.
• Conducted a Two Day Workshop on Firebird V Robot for the students of TE ETC, on March 26th and 27th 2021, under the DBCE e-Yantra Robotics club
• Conducted a Two Day Workshop on Firebird V Robot for the students of TE ETC, on 29th & 30th of October 2021.

• Authored and presented paper titled “INTELLECTUAL PROPERTY (IP) PROTECTION USING CRYPTOGRAPHIC SHA-1 HASH ALGORITHM” in the 5th National Conference on Electronic Technologies in Electronics and Telecommunication Engineering Department, Goa College of Engineering, Ponda on 25th and 26th April 2014.
• Authored and presented paper titled “CRYPTOGRAPHIC SHA-1 HASH IMPLEMENTATION FOR INTELLECTUAL PROPERTY (IP) PROTECTION” in the 2nd International Conference on Emerging Trends and Research in Engineering & Technology in IBSS College of Engineering, Amravati, Maharashtra on 29th March 2014.
• Authored and presented paper titled “INTELLECTUAL PROPERTY (IP) PROTECTION IN VLSI DESIGNS” in the 2nd National Conference on Modern Trends in Advanced Computing in Computer Engineering Department, Goa College of Engineering, Ponda on 25th and 26th April 2014.
• Published a paper titled “INTELLECTUAL PROPERTY (IP) PROTECTION USING WATERMARKING AND FINGERPRINTING TECHNIQUES” in IEEE Xplore, July 2017, which was presented in the 2nd International Conference on Applied and Theoretical Computing and Communication Technology (iCAATcct-2016), technically sponsored by IEEE Bangalore Section held at SJB Institute of Technology, Bangaluru, Karnataka, during 21-23 July 2016, ISBN: 978-1-5090-2399-8.
• Published a paper titled “ENERGY MONITORING OF CURING PUMPS USING PLC AND SCADA” in IEEE Xplore, presented at the 4th International Conference on Communication and Electronic Systems (ICCES-2019), organized by PPG Institute of Technology, Coimbatore, India, during 17-19 July 2019, ISBN: 978-1-7281-1261-9
• Published a paper titled “Raspberry Pi based Full Fledged Automated Fruit Farm” in IEEE Xplore, presented at the 4th International Conference on Communication and Electronic Systems (ICCES-2019), organized by PPG Institute of Technology, Coimbatore, India, during 17-19 July 2019, ISBN: IEEE Xplore ISBN: 978-1-7281-1261-9
• Published a paper titled “Automatic Shopping Mart Using Firebird V Robot”, in 5th International Conference on Engineering Research & Innovations, Equinox – 2020,  in association with IEEE, IETE & CSI organized from 19th to 20th March, 2020 at Terna Engineering College, Nerul, Navi Mumbai.
• Published a technical paper titled, “Design of Sensor nodes for agricultural field monitoring using IOT and BLE mesh technology”, for the 7th IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON 2020), MNNIT Allahabad (27th-29th November 2020)
• Published a paper titled “Design and Implementation of Library Management Robotic System”, in 3rd IEEE Bombay Section Signature Conference (IBSSC), organized by IEEE Bombay Section and ABV-IIITM Gwalior, India on 18-20 November,2021. 978-1-6654-1758-7/21/$31.00 ©2021 IEEE
• Published a paper titled “Augmented Reality based Online Shopping”, in 3rd IEEE Bombay Section Signature Conference (IBSSC), organized by IEEE Bombay Section and ABV-IIITM Gwalior, India on 18-20 November,2021. 978-1-6654-1758-7/21/$31.00 ©2021 IEEE

9.00 am To 5.00 pm [on prior appointment]

• Network Analysis and Synthesis lab (Basic Electronic Engineering – E1)
• Basic Electrical Engineering lab (Basic Electrical Engineering – E7)
• Digital Signal Processing lab (Database lab – C5)
• Linear Integrated Circuits Lab (Analog Electronics – E3)
• Digital Electronics and Microcontroller Applications Lab (Embedded systems lab – E6)
• Process Control Instrumentation Lab (E4 & E9)
• Embedded systems Lab (Embedded systems lab – E6)
• Introduction to ARM (Embedded systems lab – E6)
• Electronic System Design and Manufacturing Lab (Embedded systems lab – E6)